
Spears® 829-210BL Low Extractable Reducing Coupling, 1-1/2 x 3/4 in Nominal, Socket End Style, SCH 80/XH, PVC, EPDM/FKM O-Ring Seal, Domestic
MFG Part#829-210BL
DSG#651777
Spears® 829-210BL Low Extractable Reducing Coupling, 1-1/2 x 3/4 in Nominal, Socket End Style, SCH 80/XH, PVC, EPDM/FKM O-Ring Seal, Domestic
MFG Part#829-210BL
DSG#651777
- UPW process piping and fittings shall be manufactured from a specialty low-extractable, Polyvinyl Chloride (PVC) compound with a Cell Classification of 12343 per ASTM D1784. All pipe and fittings shall be produced to SCH 80/XH dimensions, manufactured in strict compliance to ASTM D1785 (pipe), and ASTM D2467 (fittings). These products shall carry a Type II pressure rating and consistently meet or exceed the applicable Quality Assurance test requirements of these standards with regard to dimensions, workmanship, burst pressure, flattening resistance and end-product quality. All UPW process valves shall be True Union-style diaphragm or True Union-style quarter-turn ball valves produced from the same low-extractable PVC compound. All valve diaphragms and seats shall be PTFE; valve O-rings shall be EPDM or FKM as applicable. All valve union nuts shall have buttress-style threads. All valve components shall be replaceable. System components shall be joined utilizing Spears® One-Step specialty solvent cement specifically formulated for joining the system that meet or exceed the requirements of ASTM D2564. All system components shall be manufactured in the USA by an ISO-certified manufacturer. All UPW piping and fittings shall be bagged and sealed immediately after manufacture to maintain cleanliness, and boxed and stored indoors at the manufacturing facility until shipped from the factory. UPW process pipe, fittings, valves and cement shall be that as manufactured by Spears® Manufacturing Company.