The new patented EZ-RJ45® Cat6 connector simplifies twisted pair terminations by allowing the wires to be inserted through hole connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! crimp with the patented EZ-RJ45® crimp tool crimps and trims in one cycle. (see part number 100 004 or 100 054 EZ-RJPRO™ HD). Manufactured in the USA.