The LMDM-101 Dimming Wall Switch is a low voltage device for dimming control of one or more lighting loads. It is part of a Digital Lighting Management (DLM) system and can dim load(s) connected to DLM dimming room controllers and switch load(s) connected to DLM on/off room controllers. The LMDM-101 operates on Class 2 power supplied to a DLM local network by one or more room controllers. Plug n' Go™ automatic configuration assigns all loads connected to dimming room controllers to the dimming switch upon system start-up. When multiple switches are installed, default operation is for multi-way control each switch controls all of the loads on the system. Dimming switches may be reconfigured using Push n™ Learn to control only selected loads. The LMDM-101 may be used to raise or lower light levels, recall a preset level and turn lights on or off. In Active Dim mode, users can temporarily adjust the level of any dimmable load or scene on the local network by selecting a load or scene button and then pressing and holding the paddle on the LMDM-101.