Schneider Electric Square D™ TeSys™ K LC1K0901G7 K-Line IEC Contactor, 120/690 VAC V Coil, 9/16/20 A, 3NO Contact, 3 Poles - 72258

NEMA & IEC Contactors
72258 MFG #: LC1K0901G7
0.00000 / each

Schneider Electric Square D™ TeSys™ K IEC Contactor, K-Line, Series: LC1K, 120/690 VAC Coil, 9/16/20 A Maximum Load Current, 4.5 VA Coil, 3 Pole, 400 Hz Frequency, 3NO Contact Configuration, 1NC Auxiliary Contacts, 20/50 A at 600 VAC, 10/50 A at 600 VAC Contact, Screw Clamp Connection, 45/57/58 mm Size, Screw Clamp Terminal, Open Enclosure, 3600 cycles/hr Operating Cycles, -25 to 50 deg C Operating, Rail/Surface Mounting, 45 mm W x 57 mm D x 58 mm H Dimensions
QTY
  • Features
  • 8 kV rated impulse withstand voltage
  • III overvoltage category
  • 20 A at 122 deg F power circuit, 10 A at 122 deg F signaling circuit conventional-free air thermal current
  • 110 A at 415 V, 110 A at 440 V, 80 A at 500 V, 110 A at 220 to 230 V, 110 A at 380 to 400 V, 70 A at 660 to 690 V conforming to IEC 60947 rated breaking capacity
  • 25 A gG at 440 V power circuit, 25 A aM power circuit associated fuse rating
  • 3 MOhm at 50 Hz, Ith 20 A power circuit average impedance
  • 600 VAC power circuit conforming to CSA C22.2 No. 14, 690 VAC power circuit conforming to IEC 60947-4-1, 600 VAC power circuit conforming to UL 508 rated insulation voltage
  • 1.3 N-m on screw clamp terminals with screwdriver Philips® No 2/1.3 N-m on screw clamp terminals with screwdriver flat 6 mm tightening torque
  • 30 VA at 68 deg F inrush power
  • 4.5 VA at 68 deg F hold-in power consumption
  • 1.3 W heat dissipation
  • 3600 cycles/hr operating rate
  • 10 to 20 ms coil de-energization and NO opening, 10 to 20 ms coil energization and NC closing operating time
  • TC protective treatment
  • 6561.68 ft (2000 m) without derating in temperature operating altitude
  • 400 Hz signaling circuit frequency
  • 5 mA minimum switching current
  • 17 VAC signaling circuit minimum switching voltage
  • 2.2 kW at 400 VAC 50/60 Hz AC-4, 2.2 kW at 220 to 230 VAC 50/60 Hz AC-3, 4 kW at 380 to 415 VAC 50/60 Hz AC-3 power rating
  • 4 kW at 440 VAC 50/60 Hz AC-3, 4 kW at 480 VAC 50/60 Hz AC-3, 4 kW at 500 to 600 VAC 50/60 Hz AC-3, 4 kW at 660 to 690 VAC 50/60 Hz AC three-phase power rating