• Features
  • Specifications
  • Warranty Information

    • Honeywell Safety Products warrants the Primair Series to the original owner to be free from defects in materials and workmanship for a period of one (1) year from the date of original shipment from Honeywell’s factory. Honeywell’s obligation under this warranty will be, at Honeywell’s option, to repair or replace without charge the Primair Series Hood or any of its components found by Honeywell to have been defective during the warranty period, under the following terms:1) The warranty claim is made (i) by the owner who purchased the Primair Series Hood new from Honeywell or an authorized Honeywell Distributor, and (ii) not more than three (3) months after the end of the warranty period. 2) The Primair Series Hood or component is found by Honeywell to have been defective in normal use and service during the warranty period of one (1) year from the date of purchase by the owner. 3) The Primair Series Hood or component is returned freight prepaid to Honeywell, either to its factory or to a Honeywell authorized service center, and is thereafter returned to the owner freight collect. 4) This warranty does not apply to (i) any respirator or component found by Honeywell to have become defective as a result of any accident, alteration, misuse, abuse, or servicing with parts not approved by Honeywell; or (ii) deterioration or aging of any component made of rubber or other elastomer since such components can be adversely affected by undue exposure to heat, sun, water, chemicals, ozone or other deteriorating elements; (iii) ) facepiece lens, compressed-air cylinders and parts that become defective through normal use. The decision as to what constitutes normal use shall be made solely by HONEYWELL SAFETY PRODUCTS. 5) To maintain this warranty, the purchaser must perform maintenance and inspections as set forth in the Instruction Manual which shall include prompt replacement or repair of defective parts, and replacement of parts per the maintenance schedule as set forth in the User’s Instructions. THE OWNER ASSUMES ALL OTHER RISKS, IF ANY, SUCH AS THE RISK OF ANY DIRECT, INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE ARISING OUT OF THE USE OF, OR INABLILTY TO USE, THE PRODUCT. SERVICING HONEYWELL SAFETY PRODUCTS RESPIRATORS WITH PARTS NOT APPROVED BY HONEYWELL WILL VOID THIS WARRANTY AND THE NIOSH APPROVAL FOR THE RESPIRATOR UNIT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED AND MAY NOT BE VARIED OR EXTENDED EXCEPT IN WRITING BY AN AUTHORIZED OFFICIAL OF HONEYWELL SAFETY PRODUCTS

    Historical Brand

    • North


    • Splash
    • Gas, Vapors, Smoke
    • Contamination
    • Chemical
    • Biohazard
    • Airborne Particulates

    Recommended Industries/Use

    • Nuclear
    • Utilities
    • Steel and Metals
    • Pharmaceutical
    • Municipal Services
    • Medical
    • Manufacturing
    • Government
    • Food Services
    • Construction
    • Chemical
    • Other


    • Regulation - NIOSH certified when used with North Compact Air PAPR, CF1000 supplied air assembly, and North hoses and couplers.
    • Hoods available with under the chin, nylon collar and full bib versions. Hoods with collar and full bib have an assigned protection factor (APF) of 1000. Manifold directs air over lens to reduce fogging. PA121 and PA141 are coated for protection from intermittent splash. Primair 100 Series hoods for use with Compact Air 200 Series PAPR and CF1000 Series continuous flow airline feature a comfortable headgear that directs air over the lens for cooling comfort. Triple adjustment headgear for a comfortable fit.

Ordering Info

  • Hazardous Materials: Not Applicable
  • Additional Information: Honeywell Primair Series headcovers and hoods are for use with Honeywell CA200 Series PAPR and Honeywell CF1000 Series CF-SAR.  Replacement hoods available.
  • Visor: Co-polyester, 0.040 mil
  • Specification: Latex free
  • Hood Material: Spun bond polypropylene, coated spun bond polypropylene
  • Headgear: Polypropylene