Digital Circuit Breaker Finder with GFCI Outlet Tester - 67168

Tools & Testing
67168 MFG #: ET310
0.00000 /

The Klein Tools ET310 is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in th

QTY
  • Features
  • Specifications
  • Warnings

    • Exercise extreme caution around energized, bare wires, especially when working in or around an open breaker panel.
    • If using accessories to connect to bare wires ensure that the circuit is not energized before inspecting, applying, or removing the transmitter.
    • Tester is intended for indoor use only. The tester is designed for use with 120V AC electrical systems. DO NOT connect to higher voltage electrical supplies.
    • DO NOT use if the tester appears damaged in any way. Always consult a qualified electrician to resolve wiring problems.
    • Before each use, verify tester operation by testing on a known live and correctly wired receptacle and circuit.
    • Read, understand, and follow all warnings and instructions before operating testers.
    • Includes Transmitter, Receiver, user manual, and 9V battery (for Receiver)
    • Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation
    • CAT II 120V safety rating
    • Built to withstand a 6.6-Foot (2 m) drop
    • Easily accessible battery compartment. Uses one 9V battery in receiver only; Transmitter does not require a battery
    • Low battery indicator
    • Transmitter is powered by the circuit when connected to the electrical outlet or fixture
    • Receiver powers off automatically after approximately three minutes of non-use to conserve battery life
    • The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411)
    • Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets. The transmitter may be connected
    • Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use
    • Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices
    • Operates on 90-120V AC circuits
    • Receiver delivers clear visual and audible indications when the correct breaker has been located
    • Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker
    • Quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected
  • Weight: 7.2 oz. (204 g)
  • Included: Includes Transmitter, Receiver, user manual, and 9V battery for Receiver
  • Standard: CATII 120V
  • Material: PC & PC-ABS housing and electronic components
  • Overall Width: 1.39'' (35mm) (With Transmitter docked in Receiver)
  • Overall Height: 2.16'' (55mm) (With Transmitter docked in Receiver)
  • Overall Length: 10.96'' (278mm) (With Transmitter docked in Receiver)
  • Special Features: Transmitter docks in Receiver Transmitter integrated GFCI outlet tester in receiver
  • Application: Locate Circuit Breakers in Panel, Test GFCI Devices
  • Type: Electronic Tester