Universal Hot Surface Ignition Integrated Furnace Control - 2750

HVAC/R & Hydronics
2750 MFG #: S9200U1000/U
0.00000 /

Universal Integrated Furnace Control offers universal compatibility and diagnostics. It replaces a large number of furnace control models in single-stage warm air furnaces. Uses 120Vac hot surface igniter. Includes instructions and special wire harnesses for easy replacement.

QTY
  • Features
  • Specifications
    • Twinning capability
    • LED system status, performance and diagnostic indication.
    • Controls circulating fan motor based on appliance requirements, in response to a conventional low voltage thermostat.
    • Appliance operation/safety requirements controlled via microprocessor.
    • Monitoring of system pressure switch, high temperature limit, and rollout functions.
    • Flame rectification circuit to monitor flame presence.
    • Main burner ignition using a 120V hot surface igniter.
    • Cross reference and wire harnesses provided for simple replacement over 195 existing furnace controls.
  • Type of Fan Used With: Standard Induction-Type Circulating Fan
  • Ciculator Load: 14.5FLA / 25LRA max @120Vac
  • Induced Draft Blower Load: 2.2FLA / 25LRA max @120Vac
  • Cooling Contactor Used With: Any 24Vac contactor rated at 1.0A or less
  • Gas Control Used With: Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Honeywell VR8205 recommended.
  • Heat Off Fan Delay: 60, 90, 120, or 180 Seconds
  • Heat On Fan Delay: 30 or 60 seconds
  • Number of LEDs: 3
  • Ignition Trials: Three, two tries if flame is not sensed
  • Interpurge: 60 seconds
  • Trial For Ignition: 4, 6, or 8 seconds
  • HSI Warmup Time: 17/27 or 30/30 seconds
  • Thermostat Anticipator Setting: (Stage 1 only) 100mA
  • Igniter Current: 5 A resistive @ 120VAC
  • Low Voltage: 24V (18-30 Vac)
  • Line Voltage: 120 Vac (97-132 Vac)
  • Cool Fan Off Delay: 0 or 60 seconds
  • Cool Fan On Delay: 5 seconds
  • PostPurge: 15 seconds
  • PrePurge: 30 seconds
  • Flame Failure Response Time (sec): 2 Seconds max @ 1µA
  • Operating Temperature Range (C): -40 C to +79 C
  • Operating Temperature Range (F): -40 F to +175 F
  • Operating Humidity Range (% RH): 0% to 95% non-condensing
  • Frequency: 60 Hz
  • Item Type: Product
  • Application: Single stage warm air furnaces